Transcript of Video Titled “Remote Control – Osaki OS-3D Pro Cyber Massage Chair”

[SCREEN TEXT: Remote Control]

Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com’ and today we’re going to demonstrate the remote control of the new OS-3D Pro Cyber from Osaki. The remote control on the Cyber is a pedestal remote, and it’s a nice remote. I’m going to turn on the power, so we can see the screen – it’s the largest screen of any of the chairs that we carry – to demonstrate exactly what the chair is doing. You can see the timer there, you can see the 3D adjustment there, and of course, the caricature of the body, and while you’re being massaged, you can view on this caricature what is actually being done to your body. This is the – you can adjust the timer here, you’ll see we went from 15 to 20, up to 25 – you can go as high as 30 minutes. You can pause the massage there.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: Over here, you’ll see, you can adjust the air intensity, minus and plus; you can adjust the position of the chair, up or down, and of course, a number of different chair features, and other little features that can be adjusted from here. Underneath this little lid, are all the manual settings of the chair, and you can adjust the manual. You can, all the chairs have automatic programs, and all of them have manual settings. These buttons here represent the automated settings, down here represent the manual settings; automated, everything is preset; manual, you can set whatever you want. You can have the chair do ‘Kneading’ and ‘Tapping’ just on your mid back. You can adjust the intensity to whatever you want it to go. You can also, you know, adjust the width of the rollers, the speed of the rollers, so you have a lot of flexibility with the manual settings, but when you’re using the automated settings, everything is preset for you, including the position of the chair. So, that’s pretty much the remote control, and how it works on the OS-3D Pro Cyber.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: It’s a very, very easy to use remote, and I will just say to you, that you may be a little intimidated by the remote control when you first get the chair. Don’t be, you will be an expert within a few hours, if not a few days, once you get using the chair. This is very easy to use, it’s push button, they’re large buttons, so they’re easy to see for folks like me that might have forgotten their glasses. It’s easy to see what button is to push for the automated programs, a very, very nice chair. Oh, and one thing I forgot to mention, and I just want to zero in on this, it has the ‘3D’ button here. So, when you toggle the left side of the button, you can retract the intensity of the massage. When you toggle the right side of the button – see, you can see here, now the intensity increases – all the way up, and then back, all the way down. When you toggle the top of that button, it will move the rollers up; if you toggle down, it’ll move the rollers down. So, that ‘3D’ toggle button is kind of important – I forgot to mention that – that’s like the primary feature of this chair, is the 3D, adjusting the 3D intensity. We’ll do a separate video on it, but I just wanted you to know that that is part of the remote control, and it’s very, very easy to use.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: It’s just a toggle – I never figured that out at first, it took me a while to figure it out – but it’s a toggle, right, left, up, down, you don’t just push the button in the middle. OK, so that is the remote control for the OS-3D Pro Cyber, I hope you found it helpful. Please feel free to subscribe to our YouTube channel, if you liked the video, and you want to be notified of upcoming videos. Of course, feel free to share us and ‘Like’ us on Twitter, Facebook, and Google Plus, we appreciate you helping us spread the word about massage chairs. Again, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com,’ thanks for visiting today, and we’ll see you on the next video. Bye bye.

Click on the following link to watch this Osaki OS-3D Pro Cyber tutorial on our YouTube channel.