Transcript of Video Titled “First-Time Use – Human Touch Novo XT Massage Chair”

[SCREEN TEXT: First-Time Use]

Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com‘ and today I’m going to show you how to use the Novo XT massage chair from Human Touch for the first time so that you can get started on it right away, and while you’re enjoying the massage, then you can read the owner’s manual, and get a better feel for how the chair operates, but it’s a very simple chair to get started in. Of course, you get in, you put your feet, and your calves, inside the foot-ottoman massager here, and there are foot rollers under there. You’ll feel them just by putting your feet on it, and you put your arms in the armrests, and you lean your head back. I like to remove the two pads on these chairs, so that I can feel the rollers on my neck. If you have the pads there, you won’t feel much of the massage on the neck. Anyway, what you do is you take the remote, and the remote is in one of these two pouches you have, you can put it on either pouch, and you pull it out, and the first thing you’re going to do is push the power button. Bang, and that will bring up the menu options. I like to just get started in an auto-program, so it’s very easy. It defaults to auto, I push the OK button, and then it gives me options for auto-programs, and you can see there’s a number of programs there, like the ‘Awake,’ ‘Energize,’ ‘Performance,’ ‘Recovery.’ And each of those, if I push OK on ‘Awake,’ you’ll see that there’s four variants of that massage program.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: So, let’s say I just want to do ‘Awake,’ I push OK again, and now the chair is going to recline in to its default position, and I’m just going to lay back and relax. The chair is fairly intuitive, you see how the legs are extending on the own? It kind of measures my legs right off the bat, and you’re good to go. If you find that the rollers are too low, you can adjust the height of the rollers on the shoulders. Like, they feel a little low to me right now, and I didn’t show this to you right off the bat, but when you turn on the chair, there’s a little screen that’ll show up with the heights of different bodies, one through nine, and I think this one defaulted to four, I probably want to raise it to five or six, because I didn’t feel the rollers were right on the top of my shoulders, I felt like they were kind of down a little bit between my shoulder blades. So, that’s what the body scan is all about, is trying to figure out how tall you are, where your head, and where your shoulders are at, and this chair – if you feel like, during the scan – it’s one of the easiest chairs to override the scan with. So, as soon as you turn that on, and you see the different body heights, you can just roll it up or down. Me, I should’ve pushed it up a little bit to position five or six, to get the rollers to come up a little bit higher on my shoulders. That way, I can make sure that my neck gets massaged when the rollers come up. The thing is that if you don’t scan right, or don’t get the right scan, or don’t measure your spine, if the chair doesn’t get you just right, you have to override that scan. Otherwise, you’re not going to get the full neck-and-shoulder massage, the way the chair was designed to give it to you. But anyway, that’s how you sit in the chair, it’s pretty easy.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: You turn the power on, you press the menu option that you want, and we just select the first one that it defaulted to, and three pushes, and you’re good to go. Now, when you’re done, of course, there’s ways to extend the legs, if the legs are still too short. There’s another zero-gravity position, you can recline back ever farther, but we’ll go in to those features in separate videos. So, when you’re ready to stop, all you do is go to the remote control, and go back to the power button. You’ll see here, it says ‘Power’ or ‘Stop,’ ‘Power,’ ‘Restore.’ Now, we turn it off, it says ‘Stop.’ I want to just turn the power off, so I arrow over. You can arrow back to ‘Stop,’ or go to the power off, and then it’ll ask you if you want to restore the chair to its original position. Push OK again, and now the chair comes back up, and the next thing you know, you’re back in to an upright, neutral position, and you can exit the chair, very easy, very easy chair to get started in, and of course, very easy to finish in. Most chairs, when you turn the chair off, when you turn the power off, it’ll immediately start to incline, and get back up to the upright position, this chair asks you specifically, do you want to turn the chair off, one, two, do you want to restore it back to the original position, and I think that’s a safety feature. What if you had a grandchild, or a dog, or a cat, or something underneath the ottoman, and you push ‘Restore,’ and the chair starts to go up, and whatever dog, or person, or animal that is underneath that ottoman may not, you know, have enough time to escape. So, it’s always good to kind of check to see if anybody, or anything, is underneath that ottoman.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: That’s why I think it asks you to push the button ‘Restore,’ because it’s asking you, are you ready to restore the chair, is the chair safe to restore? But anyway, that’s the best way to use the chair for the first time. Of course, once you get the hang of it, and you understand what the chair can do, and what programs it has, you can select whatever you want. You can adjust height of the rollers, you can adjust the length of the ottoman, you can adjust the intensity of the air pressure of the airbags, you can adjust the intensity of the roller massage itself. So, there’s a lot of things you can adjust, but what I just showed you is a very, very simple way to get started on it. So, I hope you found this video helpful. If you did, please feel free to thumbs up ‘Like’ us on our YouTube channel. And of course, help us spread the word about massage chairs by sharing this video on your Facebook, Twitter, LinkedIn, Google Plus, LinkedIn, whatnot. We just appreciate you helping us spread the word about massage chairs. I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com,’ and I will see you again on the next video. Bye bye.

Click on the following link to watch this Human Touch Novo XT massage chair tutorial on our YouTube channel.