Transcript of Video Titled “First-Time Use – Infinity Genesis Massage Chair”
[SCREEN TEXT: First-Time Use]
Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com‘ and today I’m going to show you how to use your new Infinity Genesis massage chair for the very first time.
[SCREEN TEXT: SUBSCRIBE to Our YouTube Channel and be Notified of Each New Massage Chair Video!]
Alan: It’s a pretty simple way to get started, so can spend the rest of the time on your chair reading the owner’s manual, and really learning how to use this chair. But like most massage chairs, it has an ottoman that kind of protrudes from the body of the chair. Sometimes it’s a little tough to get in to a chair like this, any massage chair if you’re older and limited in your range of motion, or if you have bad back pain, but you can usually get in pretty easily once you’ve done it once, then you can figure out how to do it again and again and again. But usually you just kind of hold on to the side of the armrest, put your feet inside the calf wells, and the foot wells, and then just lean back in to the chair. This chair defaults to a pretty good recline right off the bat. But anyway, then you grab the remote control out of the side pouch, and you got to turn the chair on to get started. So, let’s push the on-and-off button, and you’ll see right away it goes to the auto options. Now, auto means pre-programmed, set, 15- to 30-minute programs that you can just turn on, and it’ll do everything you need it to do.
[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]
Alan: There’s other options here. We’ll go through this on the remote control, manual, 3D massage, airbag, heat, settings, etcetera, etcetera, but to get started, all you have to do is turn the power on, and then you can just select OK, and it’ll bring up the first option. And there’s – how many options are there – six options, including the stretch program. But let’s just, let’s say you just want to get going on the very first program, you just push OK again, and bang, the chair is going. So, then you can relax, get your owner’s manual out, and read all about your new chair. But so again, get in the chair, get yourself positioned comfortably, take the remote, press the power button, and then it’ll automatically default to the auto-programs, which is where most people go anyway when they start on a new chair, and then you select the program you want. So, that’s one, two, three button pushes, and you’re good to go, and now you can see that the chair is kind of getting me measured up. The legs are extending to where my legs go, the rollers are kind of figuring out where my shoulders and my head are, and that is what any chair will do for you nowadays. It’ll do a body scan and figure out how tall you are, and how long your legs are. Anyway, the chair will get an idea of what your body size is, and then it’ll start to massage you.
[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]
Alan: So, anyway, you can just sit and relax in this position until the program ends, and chairs are made nowadays to stay reclined when they end, because I think the massage chair companies learned pretty fast that a lot of people that use these chairs are trying to get relaxed and help them sleep because they can’t sleep. You’ll fall asleep in a massage chair pretty easily if you give it, if you get some quiet, and no kids are bugging you and no pets are bugging you, and you turn it on and let it run its course, and you could be asleep by the time the program’s done. You don’t want the thing to jolt, you know, jolt and start moving back up, if you’re getting some rest. So, what you do then, at that point, you just push the power button, and then it’ll bring the chair up to the neutral position. I’m going to stop this mid program. When you do that, again, you push the power button, and you’ll see that just by pushing it, it’ll stop the massage, it’ll bring the chair back up to the neutral, default position, and then you can get out of the chair. You’ll notice here, see how the chair is sliding back? This chair has a sliding base, and we’ll have a separate video on that altogether, but this is a space-saver chair.
[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]
Alan: And I never mentioned that in the introduction video to the Genesis, but it is a space saver, so you can put it right against the wall, you know, within probably an inch to two inches from the wall to save space if you have tight quarters. But anyway, that’s first-time use on an Infinity Genesis, very easy, not much different than any other chair. It’s easy to get started, easy to get out of, and then you can take your time while you’re sitting in it to really learn the ends and outs of the chair, and what other things, what other wonderful things the chair can do for you.
[SCREEN TEXT: Please “Thumbs Up” Like This Video!!]
Alan: Anyway, that is the first-time use of the Infinity Genesis chair. If you found it helpful, please thumbs up ‘Like’ on our YouTube channel. And of course, if you can help us spread the word about massage chairs, please share this video on your social media platforms, or how ever. We just appreciate you helping us spread the word. I’m Dr. Alan Weidner for ‘Massage-Chair-Relief.com,’ and I will see you again on the next video. Bye bye.
Click on the following link to watch this Infinity Genesis massage chair tutorial on our YouTube channel.
#infinitygenesis