Osaki OS-3D Pro Dreamer – 1st Time Use (Video)

Transcript of Video Titled “First Time Use – Osaki OS-3D Pro Dreamer Massage Chair”

[SCREEN TEXT: Your First Time]

OS-3D Pro Dreamer (faux wood accents)Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com’ and today we’re going to show you how to use the Osaki OS-3D Pro Dreamer massage chair for the very first time. People can get very intimidated by a new massage chair, not just by the size and the mechanics of it all, but by the remote control. Sometimes the remote control is very intimidating, because there’s so many buttons, and sometimes they’re very small, and it’s hard to know what to do. Then, there’s an owner’s manual that you have to read and that, sometimes, can be a little intimidating, so what I’m going to do, is I’m going to show you how to use this chair your first time out, to make it real easy for you – and then, while you’re sitting on the chair for your first time – then you can read the owner’s manual, and get a handle on how to make things work. Of course, I took off my shoes. You want to take your shoes off, you don’t want to use shoes in the massage chair, or the soles of the feet will eventually wear out the material quicker than if you just had stocking or bare feet.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: So, you sit in the chair. Make sure that all the airbags are not folded over, sometimes there’s a tendency for – when you put your leg in to an ottoman that you fold the airbag over, make sure everything’s upright, and situated properly, make sure you’re also not pushing back on the – you’re not, you know, folding down the shoulder airbags as well. Now, when you’re in this position, all you have to do is push the button at the top, top left corner, that’s the power button. As soon as you turn that power button on, you’ll see a display, and of course, the chair is active. The chair actually moves to a preset position, so you can actually begin your massage right here. There’s a slight recline – by the way, you can move this pillow also, if you don’t want the pillow, and I don’t usually use the pillows, I take them off – then you can just recline back. Now, the chair is now ready to turn on, but what I like to do, is I like to push the zero-gravity button, and in this chair they call it ‘Anti-Gravity.’

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: When you push that button, the chair reclines in to a zero-gravity position, which means the seat tilts up at a 30-degree angle, and the chair back and the chair seat articulate at a 120-degree angle, and that is the optimal zero-gravity position. So now we’re ready to go, and that’s basically been two buttons. Push the power button, push the ‘Anti-Gravity,’ button, and now let’s push on a program. I’ll put on the ‘Anti-Stress’ program, and there’s four – I think there’s a maximum of nine automatic – forms of an automated program that you can use. Of course, you can pop this thing back in the remote holder, because now we’re done, and you just sit back. Make sure you keep your head back while the chair is doing its scanning, because it has to figure out where your shoulders are, and where your head is relative to your shoulders. If you’re sitting like this the whole time, it’ll never feel your head, it’ll never know where your head is, it’ll think your head is down here where your shoulders are, and you’ll never get your neck massaged the way it should be massaged. So, right now, you can hear the beeping of the chair, of the remote control, that’s just, it’s telling us that the chair is looking for the shoulders, and trying to figure out where they are, and that is it. You can sit like this for the entire length of the program.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: You can let it run, the program can run completely through in its entirety, and then it’ll just shut off automatically, and default, and restore itself back to the neutral, off position of the chair. Or, you can turn off the remote control, and the chair right there, and you can see the chair is now restoring back to its neutral, default position. Then, you can get out of the chair, or you can turn it on and start again. So, that is how we recommend you use the chair for the first time. Power on, ‘Anti-Gravity’ – and you don’t have to use the ‘Anti-Gravity’ – so you can do power, ‘Anti-Gravity,’ pick a program, three buttons, and you’re sailing. Or, if you don’t want to use the ‘Anti-Gravity’ – power, program, two buttons, and you’re done – very, very easy to use, everything is set up for you to go. So, I hope you found this video helpful, if you did, please feel free to share us on YouTube, Facebook, Twitter, Google Plus, whatnot. Of course, if you liked this video, and you’d like to be notified of subsequent videos of this chair, or any other chair video we produce, please feel free to subscribe to our YouTube channel, and you will be the first to be notified. Again, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com,’ thanks so much for visiting today, and we’ll see you on the next video. Bye bye.

Click on the following link to watch this Osaki OS-3D Pro Dreamer tutorial on our YouTube channel.

Leave a Reply

Your email address will not be published. Required fields are marked *