iRobotics 6S – 1st Time Use (Video & Transcripts)


Transcript of Video Titled “Your First Time – iRobotics 6 Massage Chair by Luraco”

[SCREEN TEXT: Your First Time]

Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com‘ and today we are going to show you how to use the iRobotics 6 massage chair from Luraco Technologies for your first time. A lot of times when people get a massage chair they’re a little intimidated by the size of the chair, the remote control complexity, and the size of an owner’s manual, so we like to do this ‘First Time’ video on most of our chairs, or pretty much all of our chairs that we do videos on, to give you an idea of how to use the chair the first time to become familiar with it. So, of course, the first thing you want to do is kick off your shoes and sit down in the chair, get your feet and your calves positioned inside the ottoman, and then of course, lean back. Sometimes, like with this chair don’t worry about getting this headpiece positioned just yet, wait until the chair reclines a bit, and then you can get yourself snuggled in so that you get the best fit for the chair.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: Now, the first thing that we’re going to do is I’m going to take this off and we’re going to zoom in, and look at the remote control, you’ll see the ‘Power’ button down here. The first thing that you want to do is push the ‘Power’ button, and when the ‘Power’ button turns on, then the whole remote lights up. Then, what we’re going to do is we’re going to let the chair recline, and it’s all preset and pre-automated, you don’t have to do anything. Now, you notice how I just snuggled in to this headpiece so my head is sitting in there. The ottoman has a manual extension. Now, the roller is going up and down my back to scan my spine to get an idea of how tall I am, where my head and my shoulders are, and what the size of my spine is and the shape of my spine. So, I’m sitting down right now waiting for this to happen. Now, while this is happening, I cannot push on any of the programs on the remote control. There’s six programs that I usually like to pick amongst on this chair, and the one that it defaults to is called the ‘Japanese’ program. You’re going to see in a moment – as soon as the scan is done, which should be any second – you’re going to see this program up here start to flash, that is the ‘Japanese’ program, they call it ‘Japanese.’

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: There you see, now the massage has started and that light is flashing. Now, I may want to change the program. So, lets say I want to go down here to, let’s go to – well, let me get on my glasses so I know what program I’m looking at here – but we go down to the, let’s do the ‘Deep Tissue.’ Now all of a sudden you know that that has changed because the light is flashing, and you’ll also notice that the position of the chair is changing as well. So, now the chair is reclining, different airbags are functioning at a different pace and a different rate. You’ll also notice that – well, I’m noticing – that the intensity of the massage and the airbags has increased. That’s, of course, in alignment with a deep tissue massage, which is by definition a more intense massage. Then, you sit in this position and the automatic program begins, and this is probably the easiest way to get started. You can either just begin with the ‘Japanese’ program, by default, or push any one of those other programs, and just sit back and enjoy.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: Now, when it’s done, the chair will shut off, and it’ll restore back to its normal position, its neutral position. You can also turn it off prematurely by pushing that same power button again, and we’ll show it here again on the video. If you push this button again, it’ll turn the program off, but it will not restore to the neutral position. You have to push it a second time, and now the chair is coming back to its neutral position, its neutral inclined position. So, here we go, coming back up to the regular position, so that’s how easy it is to use this chair. You don’t have to have – you know, you don’t need a master’s degree to figure out how to use this chair and how to get it started – one button starts it, and that’s all you need. If you want to change the program, push another button, bang you’re done, and that’s it. I’m Dr. Alan Weidner from Massage-Chair-Relief.com’ discussing your first time use of the iRobotics 6 massage chair from Luraco Technologies. If you found this video helpful, please subscribe to our channel and ‘Like’ our video and share us and ‘Like’ us on Facebook and Twitter, we appreciate you spreading the word about massage chairs. Have a great day, we’ll see you. Bye bye.

 

Click on this link to watch this iRobotics 6S massage chair tutorial on YouTube.

Leave a Reply

Your email address will not be published. Required fields are marked *