HT-7120 Stretch Program – Video & Transcripts


Transcript of Video Titled “HT-7120 Massage Chair – Stretch Program”

[SCREEN TEXT: Stretch Program]

Alan: Hi, I’m Dr. Alan Weidner from ‘Massage-Chair-Relief.com‘ and today we are going to talk about the Human Touch HT-7120 massage chair and demonstrate the ‘Stretch’ program. And we have Christy in the chair who’s going to show us how the ‘Stretch’ program works while she’s in it. And there’s a button on the remote control called ‘Stretch.’ The ‘Stretch’ program is a very interesting program, a lot of chairs have it now, Human Touch kind of introduced it to the market. But what it does is it takes the chair back in to – most of the chairs will take you back in to a horizontal position – as does this one, and when it’s reclined we listen for a few beeps, on the remote, 3 sets of 2 beeps. And then once that is on, what will happen, and it’s – I like to consider it more of a – there, OK now the ‘Stretch’ program’s on and I can let go of the remote, and you can put the remote back in to the pocket on the side of the chair.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: But what the ‘Stretch’ program basically does, it’s not stretching hamstrings or quads or anything like that, what it’s doing, the term I like to use to describe it is more of a milking. The ottoman goes up and down, as you can see happening on Christy right now, and the airbags grab her foot,or grab her ankles and her calves, and pull the – kind of distract and stretch the spine – and then you’ll also notice that the chair back, at some point, will also come up and down. So, what’s happening is that the ottoman and the chair back alternately incline, recline, raise and lower, and thus milking, if you will, the spinal joints, the spinal discs, the spinal soft tissue. And that, it doesn’t seem like a lot, but while this is going on, also the rollers are compressing her back as well. Now, if you’ve got a hyperlordotic low back, or too much curve in the low back, it can be uncomfortable. Or if you’ve had some kind of procedure done to the low back that is – that creates some major, major tenderness – you might find that the ‘Stretch’ program might be a little intrusive to you and a little bit painful.

[SCREEN TEXT: ‘www.massage-chair-relief.com’ 888-259-5380]

Alan: But for the most part, you will feel it, it looks very simple here while Christy’s on the chair now, but underneath it, the rollers are going and it can be quite intense. [to Christy] Do you feel that intensity? I mean, you feel like it’s really working you, don’t you?

Christy: [nods]

Alan: And so, the chair is reclined, the ottoman is down, grabbing her ankle and her calves, and the rollers are pushing up on her back, so that just induces this stretching feature of the low back. And then when the chair comes up and down it also has this milking effect, and that is the ‘Stretch’ program. When the ‘Stretch’ program is done, you can – and by the way it’s a 15-minute program – when the ‘Stretch’ program is done, you can simply press the ‘Stop’ button. You press the ‘Restore’ button, and the chair will bring you back up to a neutral position, ready to disembark the chair, and so that is the ‘Stretch’ program for the HT-7120 massage chair by Human Touch. Again, I’m Dr. Alan Weidner from Massage-Chair-Relief.com.’ You can get more information on the website or you can call us toll-free at 888-259-5380. Thank you.

 

Here is a link to this HT-7120 massage chair tutorial.

Leave a Reply

Your email address will not be published. Required fields are marked *